Wide-Bodied Floats
From $33,000.00
Standard Features ‘Grand Prix’ Wide Bodied Floats.
Wide Bodied Floats.
- Wide Bodied Floats Internal height 7’4”
- Wide Bodied Floats Net Internal width 6’4”
- Tailgate Height 4’7”
- Standard GVM 3000 kg.
- Stall length 6’6”
- Galvanised drawbar 100mm x 50mm x 3mm which extends right back to the front spring hangers, irrespective of the length of the float. Drawbar is approx. 1.1 metres in length.
- Fully galvanized chassis, chassis rails are 50 x 50 x 3mm
- Filled in A frame with aluminium chequer plate.
- Heavy duty 8” swing up jockey wheel.
- Floor joists are set at 190 mm apart. and over that Australian Hardwood Form Ply is tek screwed at 180 mm intervals. This timber is used extensively in the construction industry as form work in large concreting applications. It has a waterproof coating on both surfaces and has high strength ratings.
- Stall walls are lined with 1.6mm galvanised sheeting which is welded to the frame.
- Rubber is glued to the stall walls to a height of 960 mm. Side padding is placed above that.
- Natural rubber, 10 mm thick, dimpled, with superior anti slip properties and in one section without joins, is glued to the floor and tailgate. All rubber is sealed at the edges.
- External .75mm zincanneal cladding, is applied horizontally, in continuous lengths, and glued to the frame resulting in a smooth, rivetless finish.
- Axles are 50mm square with 2.5” drops, both fitted with electric brakes.
- Rocker Roller Suspension rating 3000 kg, allowing GVM capacity. Breakaway unit.
- The tailgate is 1.4m in height (4’7”) and is fitted with two heavy duty German Stabilus gas struts, fitted with sealed dust covers, stainless steel hinges and a chequer plate step. The edges are totally sealed with polyurethane. Spring loaded over centre latches are fitted to the tailgate and these bounded by aluminium chequer plate.
- Stabilus (German) gas struts are fitted to all doors.
- One recessed tie up on each side of the float.
- Recessed door handle(s).
- New 8 ply light truck tyres, 15” Sunraysia mags.
- Four roof vents, 2 in the front of the stall area and 2 in the gas lift storm door facilitate excellent air flow.
- Two interior lights, one in the front area over the tack box and on at the rear in the stall area.
- One head divider, that can be placed straight ahead or at 90 degrees to the left or right.
- Removable and adjustable drop chest bars 2 heights.
- Removable centre pole. Fitted with mesh filled removable head divider.
- Removable, padded divider. With or without rear leg. Both options are standard.
- Drop down chest bars, adjustable to two heights.
- Breeching doors.
- Gas Lift Storm Door, fitted with Stabilus struts and 2 x pop out vents.
- 2 x personal access doors.
- One pair of sliding side windows
- The interior is fully padded. Walls to a depth of 400mm.
- Aluminium chequer plate to a height of 760mm around the front and covering the top of the mudguards and rear triangular stays.
- Aluminium full-sized steps to access door/s. Aluminium fills behind mudguards. aluminium chequer plate to the mudguards and around the front to a height of 760 mm. • L.E.D. lights are standard.
- Automotive two pack white paint is standard with scrolling and pin striping.
Standard features which are not standard inclusions in normal width straight load floats.
- Front tack box fitted with 2 x access doors, bridle hooks and a central hanging rail.
- Rocker Roller Suspension.2 x electric braked axles.
- Break Safe Breakaway unit.
- Gas Lift Storm Door.
- Breeching doors.
- 2 x Access doors.
- Pair of Sliding Side Windows
- 5 year structural warranty.
